HEILO's Sanitary Self-priming Pump, PW-Z series water pumps, with both pressure switch control and flow switch control, cast iron pump body, cast iron pump connection, brass impeller, 100% copper wire, cast aluminum motor case, in high efficiency and low consumption, and available to match with pressure tank if you need, is a new design electric water pump, enjoying high water lifting head, which is suitable for domestic water lifting from deep wells, automatic boosting, water tower supply, solar hot water boosting, garden irrigation system etc., also available in OEM & ODM.
Performance Range of Sanitary Self-priming Pump PW-Z
Flow rate up to 3.4m鲁/h
Head up to 50m
Application limits
Suction lift up to 8m
Max. Liquid temperature up to +90鈩?/p>
Ambient temperature up to +40鈩?/p>
pH level: from 6.5 to 8.5
Max working pressure: 5bar
Power frequency is 50Hz, Voltage is 220V AC for single phase with the fluctuation range between 10%, and 60Hz is in optional.
Major Component
Pump body: Cast iron
Pump connection: Cast iron
Motor case: Aluminum
Impeller: Brass
Motor shaft: Carbon steel, SS.304 fabric-axles is optional
Mechanical seal: Ceramic/Graphite
Features
Pressure switch control and flow switch control
Pump body insert of stainless steel 304
The impeller is copper alloy
High quality mechanical seal
Performance chart
Technical Data
Installation Schematic Diagram on PW-Z intelligent water pumps
Major Application Fields
Installation and Precautions:
1. Use steel tube or rubber tube (not too soft for fear of being sucked flat) to connect the foot valve and the inlet of the electric pump, and the inlet pipeline and the junction part shall be ensured sealed without leakage.
2. The water outlet shall be connected firmly in case of water splashing on the motor part and cause electricity leakage of the electric pump.
3. When using the rubber tube, please pay attention to its temperature tolerance limit and avoid breakage and water leakage of the rubber tube resulted from its heating and deformation.
FAQ
Q1: Is customized service available?
A1: Of course, OEM & ODM both are available, which needs your authorization on using your brand.
Q2: What's your payment term?
A2: 鈶?TT: 30% deposit in advance, 70% balance before shipment for new customer and against BL copy for old customer;
鈶?L/C: 100% irrevocable L/C at sight;
Remarks: the payment term normally is as the aboved shows, and D/P at sight is available for actual demand.
Glance on HEILO
Market Distribution
We offer satisfying service.
Honesty is our concept and quality always stands the first in HEILO.
Deliveries
1. Few samples: By Express like FedEx, DHL, UPS, TNT etc.;
2. Batch goods/ Full containers: By Sea;
3. LCL goods: Customers' specified freight forwarder warehouse or other negotiable shipping ways;Self-priming Peripheral Pump
website:http://www.heilopump.com/surfa....ce-pumps/self-primin